Analytical Instrument Documents

Comprehensive two-dimensional gas chromatography (GC×GC) is a kind of continuous heart-cut GC system. Two different types of columns are connected via a modulator in the same GC oven. By using the two columns together, this technique provides very high separation capabilities when compared to one- dimensional GC analysis. However, GC×GC systems require a fast data acquisition detection system in order to record the very narrow time width peaks observed in the GC chromatograms. The JEOL AccuTOF-GC is a time-of-flight mass spectrometer (TOFMS) that fully meets this high speed data acquisition requirement at 25Hz (0.04sec) so it can be successfully used as the detection system in combination with GC×GC. In this work, the AccuTOF-GC was used for the qualitative analysis of polycyclic aromatic hydrocarbons in kerosene by GC×GC -TOFMS.

Comprehensive two-dimensional gas chromatography (GC×GC) is a kind of continuous heart-cut GC system. Two different types of columns are connected via a modulator in the same GC oven. By using the two columns together, this technique provides very high separation capabilities when compared to one-dimensional GC analysis. However, GC×GC systems require a fast data acquisition detection system in order to record the very narrow time width peaks observed in the GC chromatograms. The JEOL AccuTOF-GC is a time-of-flight mass spectrometer (TOFMS) that fully meets this high speed data acquisition requirement at 25Hz (0.04sec) so it can be successfully used as the detection system in combination with GC×GC. In this work, the AccuTOF-GC was used to analyze kerosene and diesel oil samples by GC×GC -TOFMS.

JEOL has recently announced a 4th generation GC/HR-TOFMS system, the JMS-T200GC AccuTOF-GCx, in 2015. The AccuTOF-GCx offers high sensitivity, high mass resolving power, high mass accuracy, and a wide dynamic range in combination with high-speed data acquisition. In this application note, we show the high sensitivity measurement capability using this latest GC/HR-TOFMS system.

JEOL has recently announced a 4th generation GC/HR-TOFMS system, the JMS-T200GC AccuTOF GCx, in 2015. The AccuTOF-GCx offers high sensitivity, high mass resolving power, high mass accuracy, and a wide dynamic range in combination with high-speed data acquisition. In this application note, we show the high mass resolution that can be obtained with this latest GC/HR-TOFMS system.

JEOL has recently announced a 4th generation GC/HR-TOFMS system, the JMS-T200GC AccuTOF-GCx, in 2015. The AccuTOF-GCx offers high sensitivity, high mass resolving power, high mass accuracy, and a wide dynamic range in combination with high-speed data acquisition. In this application note, we show we show high mass accuracy and m/z stability using this latest GC/HR-TOFMS system.

The characteristics of polymeric materials vary depending on the additives. Consequently, a variety of additives can be added into the raw polymer resin in order to achieve the required characteristics for the product. PY/GC/MS is often used as an analytical method for the analysis of polymeric materials. However, PY/GC/MS is often insufficient for the chromatographic separation of additives and thermal decomposition products from the polymer. As a result, it is often difficult to assign compound identities. On the other hand, comprehensive two-dimensional gas chromatography/high resolution time-of-flight mass spectrometry (GCxGC/HRTOFMS) is a well-known technique that provides high chromatographic separation by using two different polarity GC columns. Additionally, when this technique is used with high resolution mass measurements, it can be a powerful tool for estimating elemental compositions of analytes found within a complex mixture. In this application note, the additives were identified within a commercially available molded polymer by using pyrolysis (PY)/GCxGC/HRTOFMS.

The comprehensive 2-dimensional GC (GC x GC) technique provides higher-separation capabilities for complex mixtures than the typical 1-dimensional GC measurements. However, the GC x GC technique requires high speed data acquisition, e. g. > 20 Hz, for the GC detectors due to the shorter 2nd GC column which elutes samples within just a few seconds (comparable to those used for the ultra-fast GC measurements). Recently, JEOL has developed a new generation GC-HRTOFMS system called the “AccuTOF GCv 4G”. The AccuTOF GCv 4G has high sensitivity, high resolution, high mass accuracy and high speed data acquisition, all simultaneously. In fact, this instrument can measure data using up to a 50 Hz data acquisition speed which is more than sufficient to do not only fast GC measurements but also GC x GC measurements.

Field Desorption (FD) and Field Ionization (FI) are both techniques that ionize analytes by electron tunneling from the analyte molecules to a solid surface (emitter) in a high electric field. In the case of FD, the sample is applied directly onto the emitter and heated by applying an electric current through the emitter for desorption and ionization. In the case of FI, vaporized analyte molecules are introduced into the proximity of the emitter. Both FI and FD are soft ionization methods that generally yield intact molecular ions and, in most cases, produce very few fragment ions. Generally, these two techniques are used to ionize analytes that are easy to fragment and do not generally produce molecular ions during electron ionization (EI), such as hydrocarbons in crude oil.

Field Desorption (FD) and Field Ionization (FI) are both techniques that ionize analytes by electron tunneling from the analyte molecules to a solid surface (emitter) in a high electric field. In the case of FD, the sample is applied directly onto the emitter and heated by applying an electric current through the emitter for desorption and ionization. In the case of FI, vaporized analyte molecules are introduced into the proximity of the emitter. Both FI and FD are soft ionization methods that generally yield intact molecular ions and, in most cases, produce very few fragment ions. Generally, these two techniques are used to ionize analytes that are easy to fragment and do not generally produce molecular ions during electron ionization (EI), such as hydrocarbons in crude oil.

Comprehensive 2-dimensional GC (GC x GC) provides higher-separation capabilities for complex mixtures than the typical 1-dimensional GC measurements. However, this technique requires high speed data acquisition, e. g. > 20 Hz, for the GC detectors due to the shorter 2nd GC column (comparable to those used for the ultra-fast GC measurements) which elutes samples within just a few seconds. Recently, JEOL has developed a new generation GC-HRTOFMS system called the “AccuTOF GCv 4G”. The AccuTOF GCv 4G has high sensitivity, high resolution, high mass accuracy and high speed data acquisition, all simultaneously. Also JEOL has developed a unique EI/FI combination ion source for this system which provides the capabilities of GC/EI and GC/FI measurements without having to break vacuum in order to switch between each ionization mode. Additionally, this combination is particularly powerful in that it provides library searchable fragmentation information by using EI and high mass accuracy molecular ion information by using FI.

rss

Other Resources

Walkup NMR
  • See how the Delta NMR software allows users to just "walk up" and start NMR experiments
  • Mass Spec Reference Data
  • View our page of useful molecular references for Mass Spec
  • Tutorials (Mass Spec)
  • Documents on the basics of mass spectrometry
  • Delta NMR software Tutorials
  • Videos on how to use the Delta NMR software
  • No-D NMR
  • Description of No-D NMR and how it can be used to eliminate the need for deuterated solvents
  • Non Uniform Sampling (NUS)
  • Description of how NUS is used to greatly reduce the time needed for running NMR experiments
  • NMR Basics
  • Overview of the Basics of NMR Theory
  • NMR Magnet Destruction
  • See our presentation of the slicing open of a JEOL Delta-GSX 270 MHz NMR Magnet
  • NMR Training
    Basic Operations and System Management for JEOL NMR Users
    Mass Spec Training
    Learn more about spectrometer operation and maintenance, data collection and processing, and advanced MS software operation.
    JEOLink NMR Newsletter
    We publish and send out this NMR newsletter to our customers. They can also be viewed here.
    Mass Media Newsletter
    We publish and send out this Mass Spec newsletter to our customers. They can also be viewed here.
    © Copyright 2024 by JEOL USA, Inc.
    Terms of Use
    |
    Privacy Policy
    |
    Cookie Preferences