Analytical Instrument Documents

Analysis of cyanoacrylate adhesive using the JMS-S3000 “SpiralTOF™” — Application of Kendrick Mass Defect plot analysis

Recently, Kendrick mass defect (KMD) plot analysis has been proposed as an effective data processing technique for SpiralTOF™ which allows for the structural characterization of complicated compounds1, 2. Here, a commercial acrylic adhesive containing cyanoacrylate was characterized using a SpiralTOF™ combined with KMD plot analysis.

Analysis of high molecular weight polystyrene standards by using JMS-S3000

High molecular weight polystyrene standards are analyzed by using JMS-S3000 SpiralTOF™ with Linear TOF option.

Structural Analysis of Oxidized Triolein

In this work, we report the structural analysis of oxidized triglycerides by HE-CID using the SpiralTOF-TOF.

Analysis of Phosphopeptide using TOF-TOF

In this work, we measure a monophosphopeptide (FQ pS EEQQQTEDELQDK) that was obtained from the tryptic digestion of β-casein (Bovine) using the TOF-TOF option that is available for the JEOL SpiralTOF™ system.

Analysis of the Natural Organic Compound SAAF Using the TOF-TOF Option

In this work, we analyzed the SAAF from a ciona intestinalis by using a JMS-S3000 SpiralTOF™ equipped with the optional TOF-TOF analyzer to generate a high energy CID product ion spectrum for this compound.

SpiralTOF-TOF Analysis of Bovine Serum Albumin

In a previous application note, we reported the analysis of bovine serum albumin (BSA) by Spiral and Linear modes. In this work, we show the analytical result for BSA by using the JMS-S3000 "SpiralTOF" with the TOF-TOF option.

Detection of molecular ions of fluorine compounds by GC/FI-TOFMS

This application note shows that FI is a suitable technique to determine the molecular weight of compounds which are not producing molecular ions in EI or CI.

Analysis of organic EL material by JMS-T100GC  “AccuTOF™ GC”:comparison of FD and DEI methods

We have compared FD and desorption electron ionization (DEI), which are both direct sample introduction methods, for the analysis of an organic electroluminescence material with many aromatic rings.

Accurate mass measurement of lube oil by GC/FI-TOFMS

This application note shows the result of a commercial lube oil by GC/FI and the elemental composition determination by FI.

Qualitative analysis by comprehensive 2D GC / TOFMS [3]

This application note shows the results of the qualitative analysis for sulfur-containing substances in diesel oil by GC x GC-TOFMS.

rss

Other Resources

Walkup NMR
  • See how the Delta NMR software allows users to just "walk up" and start NMR experiments
  • Mass Spec Reference Data
  • View our page of useful molecular references for Mass Spec
  • Tutorials (Mass Spec)
  • Documents on the basics of mass spectrometry
  • Delta NMR software Tutorials
  • Videos on how to use the Delta NMR software
  • No-D NMR
  • Description of No-D NMR and how it can be used to eliminate the need for deuterated solvents
  • Non Uniform Sampling (NUS)
  • Description of how NUS is used to greatly reduce the time needed for running NMR experiments
  • NMR Basics
  • Overview of the Basics of NMR Theory
  • NMR Magnet Destruction
  • See our presentation of the slicing open of a JEOL Delta-GSX 270 MHz NMR Magnet
  • NMR Training
    Basic Operations and System Management for JEOL NMR Users
    Mass Spec Training
    Learn more about spectrometer operation and maintenance, data collection and processing, and advanced MS software operation.
    JEOLink NMR Newsletter
    We publish and send out this NMR newsletter to our customers. They can also be viewed here.
    Mass Media Newsletter
    We publish and send out this Mass Spec newsletter to our customers. They can also be viewed here.
    © Copyright 2026 by JEOL USA, Inc.
    Terms of Use
    |
    Privacy Policy
    |
    Cookie Preferences