In this study, pyrolysis (Py)/GCxGC/HR-TOFMS system was applied to investigate the pyrolysis products of Vinylpyridine and Divinylbenzene copolymer as the ion exchange resin sample.
In this study, pyrolysis(Py)/GCxGC/HR-TOFMS system was applied to investigate the pyrolysis products of Ethylene-propylene–diene rubber (EPDM).
This application note shows that FI is a suitable technique to determine the molecular weight of compounds which are not producing molecular ions in EI or CI.
We have compared FD and desorption electron ionization (DEI), which are both direct sample introduction methods, for the analysis of an organic electroluminescence material with many aromatic rings.
This application note shows the result of a commercial lube oil by GC/FI and the elemental composition determination by FI.
This application note shows the results of the qualitative analysis for sulfur-containing substances in diesel oil by GC x GC-TOFMS.
In this application note, we report on the analysis of pigment component in polymer by using DIP-MS/MS.
In this study, we report on the simultaneous analysis of TSCA and RoHS by using GC/MS/MS.
We introduce an analysis example in which the hydrogen generated when steel pins are heated using a pyrolyzer is directly detected by a mass spectrometer.
In this study, we compare the results of various cold splitless injection methods using MMI to improve GC-MS/MS detection sensitivity by suppressing adsorption and thermal decomposition of the target pesticides in the GC inlet.